衡水汉江橡塑科技有限公司
当前位置:供应信息分类 > 橡塑 > 橡胶带 > 工业用橡胶制品

三元乙丙钢边止水带规格

三元乙丙钢边止水带规格 三元乙丙钢边止水带规格
  • 三元乙丙钢边止水带规格
  • 三元乙丙钢边止水带规格
  • 供应商:
    衡水汉江橡塑科技有限公司
  • 价格:
    面议
  • 最小起订量:
    1米
  • 地址:
    河北省衡水市桃城区开发区
  • 手机:
    15030823445
  • 联系人:
    段经理 (请说在中科商务网上看到)
  • 产品编号:
    125112135
  • 更新时间:
    2021-02-01
  • 发布者IP:
    121.17.59.87
  • 产品介绍
  • 用户评价(0)

详细说明

  盆式橡胶支座且具有重量轻,结构紧凑,构造简单,建筑高度低,加工制造方便,节省钢材,降低造价等优点,是适宜于大垮桥梁使用的较理想的支座。常用的有GPZ、GPZ(Ⅱ)、GPZ(KZ)三大类。 GPZ(II)系列支座目前承载力为31个级别,承载力0.8MN-60MN,能满足大型桥梁建造的需要。   GPZ(II)标准系列中,固定支座在各方向和单向活动支座非滑移方向的水平承载力均不小于支座坚向承载力的10%。抗震型支座水平承载力不小于支座坚向承载力的20%。 支座转动角度不小于0.02rad.   加5201硅脂润滑后,常温型活动支座设计摩阻系数最小取0.03.;加5201硅脂润滑后,耐寒型活动支座设计摩阻系数最小取0.06。

  The basin rubber bearing has the advantages of light weight, compact structure, simple structure, low building height, convenient processing and manufacturing, saving steel and reducing cost. It is an ideal support suitable for the use of big break bridges. There are three commonly used categories: GPZ, GPZ (II) and GPZ (KZ). The bearing capacity of GPZ (II) series is 31 grades at present and the bearing capacity is 0.8MN-60MN, which can meet the needs of large bridge construction. In the GPZ (II) standard series, the horizontal bearing capacity of the fixed bearing in the direction of non slip in all directions and unidirectional bearings is not less than 10% of the bearing capacity of the bearing. The horizontal bearing capacity of the aseismic support is not less than 20% of the support bearing capacity. Bearing rotation angle is not less than 0.02rad. 5201 grease lubrication, normal temperature type movable bearing design minimum friction coefficient 0.03.; add 5201 grease lubrication, cold type movable bearing design friction coefficient minimum 0.06.

  圆(矩)形板式橡胶支座

  Circular (moment) plate type rubber bearing

  (1)性能:本产品由多层橡胶片与薄钢板镶嵌、粘合在一定压力、一定温度和一定时间内硫化压制而成。有足够的竖向刚度以承压垂直荷载,能将梁板上部构造的反力可靠地传递给墩台,有良好的弹性,以适应梁端的转动;又有较大的剪切变形以满足上部梁体构造的水平位移。

  (1) performance: This product is made of multilayer rubber sheet and thin steel plate inlaid and glued to a certain pressure, certain temperature and a certain time. There are enough vertical stiffness to bearing vertical load, the upper structure of the beam plate can be reliably transferred to the pier force, good flexibility, in order to adapt to the rotation of the beam end; and to meet the horizontal displacement of upper beam structure of large shear deformation.

  (2)特点:本产品在桥梁建筑、水电工程、房屋抗震设施上已广泛应用,与原用的钢支座相比,有构造 简单,安装方便;节约钢材,价格低廉;养护简便,易于更换等优点,且本品建筑高度低,对桥梁设计与降低造价有益;有良好的隔震作用,可减少活载与地震力对建筑物的冲击作用。

  (2) features: This product has been widely used in bridge construction, hydropower projects, housing seismic facilities, compared with the original steel bearing, has simple structure, convenient installation; steel saving, low price; easy maintenance, easy replacement and other advantages, and the low building height, and reduce the cost of bridge design have good beneficial; isolation, live load and seismic force can reduce the impact on the building effect.

  橡胶支座是由多层薄钢板与多层橡胶片硫化粘合而成一种普通橡胶支座产品,这种产品具有足够的竖向刚度,能够将支座上部构造的反力可靠的传递给墩台,支座具有良好的弹性,以应对桥梁的梁端的转动;又有较大的剪切变形能力,以满足上部构造的水平位移。

  Rubber bearing is composed of multilayer thin plate and multilayer sheet rubber vulcanization adhesion and a common rubber bearing products, this product has enough vertical stiffness, can force reliable transfer to the pier upper bearing structure, bearing has good flexibility, to rotate the coping bridge of Liang Duan; and a larger shear the deformation ability, to meet the horizontal displacement of superstructure.

  橡胶支座特点

  Characteristics of rubber bearing

  具有构造简单、安装方便、节省钢材、价格低廉、养护简便、易于更换等特点。在板式支座表面粘复一层1.5mm-3mm厚的聚四氟乙烯板,就能制作成聚四氟乙烯滑板式橡胶支座它除了竖向钢度与弹性变形,能承受垂直荷载及适应梁端转动外,因聚四氟乙烯板的低摩擦系数,可使梁端在四氟板表面自由滑动,水平位移不受限制,特别适宜中、小荷载,大位移量的桥梁使用。

  It has the characteristics of simple structure, convenient installation, steel saving, low price, easy maintenance and easy to replace. After the Teflon plate 1.5mm-3mm thick layer on the plate bearing surface, can be made of PTFE sliding plate rubber support in addition to its vertical stiffness and elastic deformation under vertical load and can adapt to the rotation of the outer end of the beam, due to the low friction coefficient of PTFE plate, the Liang Duan in the PTFE surface free sliding level the displacement is not restricted, especially suitable for medium and small load, large displacement bridge use.

  建筑伸缩缝即伸缩缝,是指为防止建筑物构件由于气候温度变化(热胀、冷缩),使结构产生裂缝或破坏而沿建筑物或者构筑物施工缝方向的适当部位设置的一条构造缝。伸缩缝是将基础以上的建筑构件如墙体、楼板、屋顶(木屋顶除外)等分成两个独立部分,使建筑物或构筑物沿长方向可做水平伸缩。

全国热门城市

青岛

衡水

烟台